Installation Guide
CONFIDENTIAL
TG-0057_19 TM4 SUMO HD CO300-A1_A2_A2.5 Installation Guide
© Dana TM4 inc., 2013-2020
Page 10 of 42
2020-11-20
2 Transport and storage conditions
This section describes the conditions that must be adhered to when either transporting or storing TM4
products in order to ensure optimum performance once installed in a vehicle.
On leaving TM4 facilities, the product is void of all coolant and all connectors are covered. The packaging is
designed to protect the content against damage from vibrations and impacts and is able to withstand
maritime conditions during transportation.
TM4 products must be transported and stored in well-ventilated facilities with adequate protections against
dust and excessive humidity. See Table 2 details of recommended conditions.
While the products are in the original shipping crates, there are no precautions to take against electrostatic
discharge (ESD); however, when unpacking and manipulating the products, you must avoid touching the
connector pins.
Table 2
Recommended transport and storage conditions
Condition
Information
Max. ambient temperature
+85
°
C
Min. ambient temperature
-40
°
C
Max. relative humidity
85%
Min. relative humidity
5%
Condensation
Not permitted
Precipitation
Not permitted
Icing
Not permitted
Direct exposure to sunlight
Not permitted
Max. storage period
6 months
Note
: Refer to the ISO-16750-4 standard for information related to ambient temperature values.
