26
ACCESSORY INSTALLATION INSTRUCTIONS:
Dana Incorporated
IMM-0005EN Posiplan (MT-5215-0806)
ACCESSORY INSTALLATION INSTRUCTIONS:
To mount pinions, pulleys or couplings, use suitable equipment to avoid seizing; alternatively, you can heat the relative compo-
nent to 80° - 100° C.
Lubricate the grooves with a thin layer of grease or a no-grip lubricant and tighten anchor bolts to the torque value listed in
section "Values Table Torque Setting Bolts p. 32".
Fig. 23
NOTE:
Dana Incorporated recommends you assemble the motor with the central joint in position because in refitting it you
could damage the rotating retaining ring.
1
2
S
5
6
5
