Dan Dugan Sound Design Model M User Manual Download Page 3 | Manualshive

Page: 3 / 60

background image

Warranty Statement

Warranty: One year parts and labor

Dan Dugan Sound Design warrants that Model M hardware will be free from defects in
components and workmanship for a period of 12 months from the date of invoice. During the
warranty period, Dan Dugan Sound Design will cover the cost of all parts and labor to remedy
the defect, or replace products which prove to be defective. Dan Dugan Sound Design is
not obliged to honor this warranty if the hardware has failed to be maintained and operated
as specified by Dan Dugan Sound Design, in the accompanying documentation, or other
than in accordance with industry standards. Defects caused by unauthorized modifications,
misuse, negligence, act of God or accident are not covered by this warranty. Software is
provided as a convenience, but due to the wide variety of computer systems, cannot be
guaranteed to work. This Limited Warranty is exclusive and no other warranty is expressed
or implied. Dan Dugan Sound Design does not warrant that Dan Dugan Sound Design soft-
ware, or any third-party software, is error free. Third party branded or manufactured
goods are supplied by Dan Dugan Sound Design with care but without responsibility
and subject only to third party suppliers’ warranties. In all other respects Dan Dugan
Sound Design is not liable for consequential damages.

«
1
2
3
4
5
...
»

Summary of Contents for Model M





























































Reviews:

No comments

Related manuals for Model M

Verizon DSL-2750B

Brand: D-Link Pages: 2

Brand: D-Link Pages: 4

Brand: F5 Pages: 2

Brand: F5 Pages: 90

Brand: F5 Pages: 47

BroadLink SP3353

Brand: MicroNet Pages: 66

Brand: LogLogic Pages: 30

Brand: Mercusys Pages: 35

DesignCore RVP-TDA3 Series

Brand: D3 Pages: 34

NSLU2 - Network Storage Link NAS Server

Brand: Linksys Pages: 64

Brand: TRENDnet Pages: 62

IPAM-1600s Series

Brand: C-Com Pages: 148

Brand: ZyXEL Communications Pages: 2

CyberPower RMCARD201

Brand: CyberPower Pages: 8

Brand: Hi-flying Pages: 59

Modular Fast Fiber Switch Converter MT-RJ

Brand: Lindy Pages: 3

Brand: TP-Link Pages: 17

P-660R-F1 series

Brand: ZyXEL Communications Pages: 268

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands