DAN DRYER FOAMTAP 382, User Manual

Page: 2 / 9

Ø38
Ø50
220
15
Ø38 Ø50 311
88
117
D
Soap: D = ≤ 350 mm
Foam: D = ≤ 650 mm
TECHNICAL SPECIFICATIONS
DESCRIPTION DATA
Material Stainless steel - AISI 304
Voltage 6V DC, AC/DC adapter is included
Stand-by power 0.3-0.4W
Sensor type Infrared, self adjusting
Sensor range 20 mm - 150 mm. Standard 120 mm ± 20 mm, adjustable.
Soap/foam dosing volume 1-1.5 ml (soap), 0.6-0.8 ml (foam)
Soap pump service life 100,000 activations
Mechanism service life 500,000 activations
Soap container 1,500 ml
IP Class IP35
Net weight 1.9 kg
Gross weight 2.3 kg
PRODUCT TYPE / MODEL
378 Stainless steel, satin finish, SoapTap Wall
382 Stainless steel, satin finish, FoamTap Wall
IMPORTANT!
This product falls within the scope of the WEEE directive on recycling
and recovery of waste electrical and electronic equipment.
• This product should not be disposed of with general household waste.
• This product must be reused if possible.
• Contact your local authority for further details.
• This product may also be returned to the manufacturer/retailer for proper treatment,
recovery and recycling.
Dimensions and technical specifications 3
General safety information 4
Installation 5
Installation height 8
User guide 8
Light indicator 8
Cleaning and maintenance 9
Refill of soap container 9
Calibration of sensor range 10
Troubleshooting and corrective actions 11
Symptoms and corrective actions: New soap dispenser 11
Symptoms and corrective actions: Used soap dispenser 11
Parts list 12
TABLE OF CONTENTS DIMENSIONS AND TECHNICAL SPECIFICATIONS
Dimensions
Unit of measurement: mm
2 3