4M30 Camera User’s Manual
11
DALSA
03-32-10030-03
2.4 Power Input
Table 5: Power Connector Pinout
Pin
Symbol
1
+5V
The camera has the following input power
requirements:
2
+5V
3
- 5V
4
+15V
V
(DC)
r
%
Max
Ripple
mV
A
5
NC
+15
.0.5
< 50
0.5
6
NC
+5
0.5
< 50
3.7
7
GND
-5
0.5
< 50
0.8
8
GND
9
+5V
10
- 5V
11
+15V
12
+15V
13
NC
14
GND
15
GND
1
9
1 5
8
DB15M
(AMP Part # 747236-4
or equivalent)
Note:
Performance specifications are not
guaranteed if your power supply does not
meet these requirements.
DALSA offers a linear power supply
(with cables) that meets the 4M30’s
requirements (Universal Power Supply,
part number 24-00001-02, contact DALSA
for more information), but it should not
be considered the only choice. Many high
quality supplies are available from other
vendors. DALSA assumes no
responsibility for the use of these
supplies.
When setting up the camera’s power supplies, follow these guidelines:
x
Do not connect or disconnect cable while power is on.
x
Do not use the shield on a multi-conductor cable for ground.
x
Keep leads as short as possible to reduce voltage drop.
x
Use high-quality linear supplies to minimize noise.
!
WARNING:
It is extremely
important that you apply
the appropriate voltages to
your camera. Incorrect
voltages will damage the
camera.
