«CamName» User’s Manual
26
DALSA Corp.
03-32-00253-13
6.
Wipe across the length of the window in one direction with the moistened end first,
followed by the rest of the pad. The dry part of the pad should follow the moistened
end. The goal is to prevent solvent from evaporating from the window surface, as this
will end up leaving residue and streaking behind.
7.
Repeat steps 2-4 using a clean tissue until the entire window has been cleaned.
8.
Blow off any adhering fibers or particles using dry, filtered compressed air.
Horizontal Lines or Patterns in Output
Patterns can be caused by low-frequency illumination variations. Use a DC or high-
frequency light source.
Stuck Bits
If data bits seem to be stuck or do not change, check that the camera is not saturated by
preventing light from entering. Next, disconnect the digital cable from the camera. Check
the digital signals at the output of the camera, ensuring that the correct values are
present. Check all cable connections, especially right at the connector; poor connections or
broken wires will cause randomly changing bits or stuck bits.
Summary of Contents for PIRANHA CT-P1
