«CamName» User’s Manual
9
DALSA Corp.
03-32-00253-13
2
Camera Hardware
Interface
2.1 Installation Overview
Before setting up your camera or making cables for it, you should determine your
application’s requirements:
•
Calculate the resolution, speed of object or web, and lighting required (see below for
speed/resolution; see chapter 3 for optical guidelines).
•
Identify the source of your EXSYNC control signal (framegrabber, custom controller,
shaft/web encoder, etc.).
These choices affect the way you cable and configure your system. Note that most
framegrabbers supply cables, but since you may have to build custom cables, interfaces,
or controllers, planning ahead will save time and effort.
In order to set up your camera, you should take these steps:
1.
Test and connect power supplies.
2.
Test and connect User Bus control signals from framegrabber.
3.
Test and connect data signals output from camera.
You must also set up the other components of your system, including light sources,
framegrabbers, camera mounts, heat sinks, host computers, optics, and so on.
2.2 Calculating Speed and Resolution
When setting up your linescan application, you must know your application’s
requirements, including number of pixels, magnification, EXSYNC frequency, and
shaft/web encoder details.
Summary of Contents for PIRANHA CT-P1
