6
Continuously click the button on the Transmitter “N” times on
standby mode condition system will enter into the corresponding f
unction setting.
•
For example: we want to set the transmitting power to (1500mW)
1.5W, only need to click the function button 3 times, then flashes 3 times
purple light (the purple light flashing times are same with the times you
click the button) after that, coming to red light or blue light flashing (if
the blue light intermittent flashed 4 times that mean the current power is
1000mW(1wM)), when need to change the power just click the function
button which will switch to next step setting, intermittent flashed 5 times
red light means 1500mW), by this time in order to save the current setting
you need to press the function button 1s more, red light and blue light
alternately flash 2 times means saving success, automatically restart.
After function 5-8 set finished, transmitter need to reenter
frequency binding mode,(transmitter needs transfer the set parameter to
receiver), then power supply to receiver will finish frequency binding .
(all the setting will be saved permanently unless Restore factory setting or
reset it deliberately) the following is function diagram.
