17
Dallmeier electronic
PView Station PVS IV
If more than one monitor are connected they will displayed in the
Display Properties
dialog
accordingly their monitor output (
M1
=
1
,
M2
=
2
,
M3
=
3
,
M4
=
4
, see figure 7.2).
To configure other monitors proceed analog as
above.
7.3
Software
The PView, PGuard and SmartGUI software is already installed on the PVS IV. It finally has
to be configured for the particular application.
NOTE
Please refer to the according manuals for detailed information
on the installed software (PView, PGuard etc.).
M2
M3
Fig. 7-2
M1
