![background image](http://html1.mh-extra.com/html/dallmeier/pvs-iv/pvs-iv_installation-and-configuration-manual_3323001015.webp)
15
Dallmeier electronic
PView Station PVS IV
The PVS IV starts automatically in the following steps:
l
Start of the operating system.
l
Automatic login with the user account prepared from Dallmeier electronic.
l
Automatic start from the software PView and PGuard.
NOTE
A dialog requesting to enter the serial number will be displayed
when the Dallmeier software is starting if the licence dongle is
not connected accurately.
If the dialog to enter the serial number is displayed, proceed as follows:
Ø
Close the dialog
Hardlock-Dongle unlocking
with
Cancel
.
Ø
Shut down the PVS IV.
Ø
Connect the USB license dongle correctly.
Ø
Launch the PVS IV again.
After successful launch PView is displayed in full-screen mode.
The software PGuard is active in the Background (
A
).
Fig. 6-1
A