dallmeier Panomera S Series, Manual

Page: 45 / 68

45
COMMISSIONING – Panomera® S Series | REV. 1.0.1 | © 2020 Dallmeier
➡
Unhook the safety cable (secondary safety component) from the
safety cable fixation point on the outside of the housing.
➡
Run the cables coming out of the bracket and the safety cable
through the cable entry, as shown in Fig. 23.
➡
Secure the device with the safety cable coming out of the bracket at
the provided safety cable fixation point inside the housing (secondary
safety component) in order to prevent the device from accidentally
falling down during operation.
➡
Carry out the cabling and a proper earthing/grounding of the device
(see chapter “Connections and Pin Assignment” on page 54).
Fig. 23
⓯