DVE-4 / DVE-8 / DVE-16
www.dallmeier.com
14
Select from the
Channel No.
drop down box the required camera.
Make the required settings.
Activate under
Copy to Camera
the required cameras for which these settings are to
be transferred.
Click
Save
.
Transmitting an audio stream is not possible.
5.2.3
Motion Detection
In this dialog areas can be set for motion detection. In addition, an acoustic warning signal
on the device are activated when the motion detection is triggered.
Open the
Motion Detection
dialog via
Remote Configuration
>
Camera Settings
>
Motion Detection
.
Fig. 5-7
Select from the
Channel No.
drop down box the required camera.
Activate the
Enable Motion Detection
check box.
Define Areas
In the first step, the areas for motion detection are configured in the live image of the re
-
quired camera.
Select the
Area Settings
tab.
Click
Draw Area
.
Drag with the mouse by drag and drop an area above the for the motion detection
required area in the live image of the camera.
