DIS-2/M StreamerPro HDD Large UTP
56
Dallmeier electronic
IMPORTANT
Ensure that the Network settings configuration group is not
sent to the modules.
To send the configuration file, first establish a connection to one of the receiving modules.
¾
Log on and open the Config File Management dialog using menu points Config File >
Send.
¾
Click on Search (Durchsuchen).
¾
Select the relevant configuration file on your configuration PC.
¾
Check the Broadcast checkbox.
¾
Enter the first and last IP address of the relevant module group.
The configuration will be sent to all the IP addresses between Start IP and Last IP.
¾
Enter the administrator password in the Password field and click on OK.
IMPORTANT
The password must be identical for all the modules. This is the
case with the default setting (password = 3).
After confirming by clicking on OK the transfer will be started. When it has finished, the
system will display a list of transferred (or skipped) configuration groups.
Fig. 11-4
