DIS-2/M StreamerPro HDD Large UTP
46
Dallmeier electronic
10.3.5
Motion
In the Motion recording mode the recording starts if the function determines a motion
event (seee chapter 8.9, Motion detection). It is continued up to the expiration of the
adjusted time interval (timer).
¾
Activate the active checkbox (A).
¾
Set the duration of the recording (B) using
Timeout.
The timer will restart if a new motion event is
detected during the recording.
¾
Confirm with OK.
10.3.6
DaVid start/stop
This mode is used if the recording is to be controlled by an external program or device. The
module then receives the commands to start or stop the recording using the so-called
DaVid protocol.
No other settings are required for this recording mode.
¾
Confirm with OK.
10.3.7
Event recording
Event recording can be used to simplify the evaluation of a track.
Certain events can be defined in this dialog so that a marker is set and recorded in the track
if these events occur. Using suitable search functions, it is possible to go straight to these
markers in the track during the evaluation process. This allows the images that were recorded
at the time of the event to be checked very quickly.
NOTE
If events are defined here, the recording/marker setting will
take place in every recording mode. Therefore, event recording
is not included in the Mode selection list.
Fig. 10-12: Motion detection tab in the
Recording settings dialog
A
B
