DF4900HD / DF4500HD
www.dallmeier.com
31
Light gray
areas in the week timer represent
active
periods.
During active periods the
messaging function
is
enabled
.
By default, the entire period in the week timer is active.
Select Inactive Periods
Click
inactive
.
In the week timer, click and hold the left mouse button and draw a rectangle over a
relevant period.
Release the mouse button.
Repeat the last two steps until all relevant inactive periods are selected.
Fig. 9-5
Dark gray
areas in the week timer represent
inactive
periods.
During inactive periods the
messaging function
is
disabled
.
In the example shown (Fig. 9-5) the period
on Monday from 02:00 to 07:15 am
is inactive.
During this period no messages are sent out.
Confirm with
oK
if you do not want to make any additional settings.
Delete Inactive Periods
Click
active
.
In the week timer, click and hold the left mouse button and draw a rectangle over an
inactive period.
Release the mouse button.
Repeat the last two steps until all relevant inactive periods are deleted.
It is also possible to delete sections (at least 15 minutes) between inactive periods.
Confirm with
oK
if you do not want to make any additional settings.
