dallmeier DF2000A, Installation And Configuration Manual

Page: 29 / 41

29
Dallmeier electronic GmbH & Co.KG
! ! ! ! !
Position of the ID in the video picture
Select ID Position.
Select the desired position with the selector (right/left).
! ! ! ! !
Showing / Hiding
Select ID Display.
Choose between On and Off with the selector (right/left).
If you select On, the entered camera ID is displayed at the
selected position in the video picture (normal operation).
8.3.2 CCTV System
! !
! ! !
Setting the signal system
Choose between PAL and NTSC
to define the video signal.
PAL is selected by default.
8.3.2.1 PAL
! !
! ! !
Setting the video level
After selecting the video signal
you can correct the video level in
a submenu if necessary.
! ! ! ! !
Setting the synchronization
Choose between On and Off for Linelock.
The V-Phase can be corrected, if required.
NOTE
The Linelock = On and V-Phase functions are
not supported by the DF2000A model when used
with 12V DC.
--------- Basic Functions ---------
Previous Page.
Camera ID.
> CCTV System < PAL.. >
Horizontal Flip Off
Lens Select.. DC
Color On
Day / Night Setup..
Backlight
Off
Digital Zoom On..
----------------- PAL ------------------
Previous Page
> Videolevel
100
Linelock Off
V-Phase
519