22
Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com
DDF5(X)50HDV-DN-SM Commissioning
8 Installation and Commissioning
The installation and commissioning of the device may only be carried out by quali-
fied personnel.
The following tools/accessories are required for the installation of the device:
•
Torx screwdriver with hollow point (T20 H) or equivalent tool for
tamper-resistant 6-lobe security screw with pin (Torx-TR 20)
•
Circular rubber gasket for housing base
•
PG16 cable gland with suitable sealing insert
•
Drilling template, marking tool (e.g. awl) and electric drill
•
Three mounting screws (Ø 4 mm) and suitable screwdriver
WARNING
Personal injury caused by falling device or collapsing ceiling
Risk of death or serious injury to the head
➡
Observe the manufacturer’s instructions regarding the maxi-
mum permissible carrying capacity of the supporting structure.
➡
To mount the housing base, only use screws and, if necessary,
dowels that are suitable for the ceiling/wall type and construc-
tion material, such as for example:
•
Plastic screw anchors for use in solid masonry materials
(concrete/brick)
•
Gravity or spring toggle anchors for use in drywall systems
(plasterboard)
