DF3000A(-DN) / DF3000AS(-DN)
28
Dallmeier electronic
Hold a white sheet of paper in front of the camera and call up the AWB.. function. The
camera is then calibrated for the most realistic color reproduction possible, regardless
of the actual scenario.
NOTE
With light and therefore color temperature modifications, no
new measurement for white balance is carried out.
The WB Offset function can be used when the automatic white balance produces an
unsatisfactory color representation of "monochrome“ scenarios. This function modifies
the metered color temperature.
z
ATW
With ATW.. (Auto Tracking White Balance) the white balance is continually recalculated.
The white balance is readjusted accordingly in different recording conditions.
The WB Offset function can be used when the automatic white balance produces an
unsatisfactory color representation of "monochrome“ scenarios. This function modifies
the metered color temperature.
The limits within which the automatic white balance can move are set using Low Limit
and High Limit.
z
Manual
¾
Select Manual and press the Enter button to manually adjust the white balance.
8.5
Exit Menu
Three options are available to exit the configuration menu:
Last Changes
If you wish to save the changes made to the configuration,
select the Save option next to Last Changes and press
the Enter button.
If you wish to discard the changes, select the Reject option
next to Last Changes and press the Enter button.
Load Factory Settings
To return the configuration to its default settings, select the
Yes option next to Load Factory Settings and press the
Enter button.
------------- Exit Menu --------------
Previous Page.
>
Last Changes
Reject.
Load Factory Settings
No.
3000
Version 1.7
------------- Exit Menu --------------
Previous Page.
Last Changes
Reject.
>
Load Factory Settings
No.
3000
Version 1.7
