>>
español
english
français portuguese
deutsch
italiano
>>
10
DESCRIPTION
1. Handle
2. Upper Housing
3. Decorative panels
4. Ready Light
5. Clasp to fasten handle
6. Bottom Housing
7. Oil Tray
INSTRUCTIONS FOR USE
Before the first use
-
Before using the appliance for the first time,
clean the parts thoroughly (see Maintenance
section). Remove all packaging.
-
Operate the device for 5 minutes without
anything inside. Ventilate the room during
this period.
-
It is normal if some smoke or smell
emanates from the appliance when using it
for the first time.
How to use
1. Turn on
a. Make sure the device is closed.
b. Plug the device into the power outlet.
c. The Power/heat Indicator Light (Red)
will turn on.
2. Preheating
a. When the Indicator Light turns off, the
device is ready for cooking.
3. Insert sandwich / meat
a. Prepare a sandwich/meat as per usual.
b. Open the device using the handle.
c. Insert sandwich/meat carefully onto the
cooking plate.
d. Close the device using the handle.
4. Remove sandwich / meat
a. Allow between 2 to 6 minutes for the
sandwich to cook.
b. It is normal for the Heating Indicator
Light to turn on and off. The thermostat
automatically regulates the baking
temperature.
c. Open the device occasionally to check
browning.
d. Once the sandwich is cooked, remove it
using a plastic or wooden spatula.
e. Caution: the filling will be hot. Allow the
sandwich to cool first before eating.
5. Turn off
a. Once you are finished cooking, unplug
the device. Leave the device open and
allow it to cool before cleaning.
Suggestions for best results
-
Lightly brush the cooking plates with a little
cooking oil before preheating.
-
Always preheat the cooking plate before
starting to cook.
-
Make sure all ingredients are dry and at
room temperature (especially meat, poultry
or fish). Blot with a paper towel if necessary.
-
Before inserting the sandwich, spread
some butter or margarine to the exterior of
the sandwich to enhance browning.
MAINTENANCE
-
Make sure the appliance is unplugged and
allow it to cool down before starting to clean
it.
-
Never use abrasive detergents, organic
solvents or aggressive chemicals.
-
Disassembling is not required to clean the
device.
-
Never immerse the appliance or the plug in
water or any other liquid.
-
Do not use sharp utensils or scouring pads
on the cooking plate as this might damage
the non-stick surface.
-
Open the lid. Brush off crumbs from the
grooves. Clean the cooking plates with a
damp cloth with mild soap. Dry with a paper
towel.
-
For best cleaning results, first pour a little
oil onto the cooking plate to loosen the dirt.
Then wipe off using a paper towel.
-
Clean the handle and housing using a
damp cloth with mild soap.
-
Remove and empty the drip tray after each
use and wash the tray in warm, soapy
water. Avoid the use of scouring pads or
harsh detergents as they may damage the
surface. Rinse and dry thoroughly with a
clean, soft cloth and replace
STORAGE
-
Make sure the appliance is unplugged and
allow it to cool down before storing it.
-
Clean the device before storing it (see
Maintenance section).
-
The power cord should be wrapped around
the bottom of the base for storing.
-
Store the appliance in a cool and dry place.
1
2
3
4
7
6
5
