DALIAN GOODDISPLAY CO. 07502-2, Manual

Page: 15 / 38

3.3 Serial Peripheral Interface Timing
The following
VSHFLILFDWLRQVDSSO\IRU966 99&, 9WR97235
℃
Write mode
Symbol Parameter Min Typ Max Unit
fSCL SCL frequency (Write Mode) 20 MHz
tCSSU Time CSB has to be low before the first rising edge of SCLK 20 ns
tCSHLD Time CSB has to remain low after the last falling edge of SCLK 20 ns
tCSHIGH Time CSB has to remain high between two transfers 100 ns
tSCLHIGH Part of the clock period where SCL has to remain high 25 ns
tSCLLOW Part of the clock period where SCL has to remain low 25 ns
tSISU Time SI (SDA Write Mode) has to be stable before the next rising edge of SCL 10 ns
tSIHLD Time SI (SDA Write Mode) has to remain stable after the rising edge of SCL 40 ns
Read mode
Symbol Parameter Min Typ Max Unit
fSCL SCL frequency (Read Mode) 2.5 MHz
tCSSU Time CSB has to be low before the first rising edge of SCLK 100 ns
tCSHLD Time CSB has to remain low after the last falling edge of SCLK 50 ns
tCSHIGH Time CSB has to remain high between two transfers 250 ns
tSCLHIGH Part of the clock period where SCL has to remain high 180 ns
tSCLLOW Part of the clock period where SCL has to remain low 180 ns
tSOSU Time SO(SDA Read Mode) will be stable before the next rising edge of SCL 50 ns
tSOHLD Time SO (SDA Read Mode) will remain stable after the falling edge of SCL 0 ns
Note: All timings are based on 20% to 80% of VDDIO-VSS
Figure 3.3-1: Serial peripheral interface characteristics
3.4 Power Consumption
Parameter Symbol Conditions TYP Max Unit Remark
Panel power consumption during update - 25
℃
300 mAs -
Deep sleep mode - 25
℃
2 uA -
Mas=update average current × update time
CS#
t
CKPER
t
CSHIGH
t
CSSU
t
SCLHIGH
t
CSHLD
t
SCLLOW
SCL
t
SISU
t
SIHLD
SDA
(Write
Mode)
t
SOSU
t
SOHLD
SDA
(Read
Mode)
GDEH075Z90
15
／
38 7.5 inch Series www.good-display.com
GOOD DISPLAY