3. Installation and Setup
3.3 Connecting Speakers
To establish the connections between the
SOUND HUB and your DALI wireless active
speakers and any DALI WSR equipped
subwoofer, follow the steps below.
The SOUND HUB speaker connection
procedure is illustrated in
•
Check that the speakers and any subwoofer
(or DALI WSR Wireless Subwoofer
Receiver) to be used are connected to mains
power and switched on. Refer to their user
manuals to identify their power switch if
necessary.
•
Press the LINK & CONNECT button on your
SOUND HUB. The top panel position display
will illuminate and the front panel volume
indicator will illuminate cyclically.
•
Go to one of the speakers (or the WSR if
in use), and press its LINK & CONNECT
button. The channel matrix indicator on the
speaker rear panel will illuminate cyclically
while connection to the SOUND HUB is
underway. When connection is established,
the cyclic illumination will stop, leaving the
channel matrix indicators flashing slowly. If
the SOUND HUB is equipped with an HDMI
module, multiple channel indicators will flash.
Otherwise, only the stereo left and right
indicators will flash, indicating that these are
the only channels available. The speaker will
play a short confirmation tone.
•
With the speaker or WSR connected
to the SOUND HUB, it can be assigned
to a channel. The channel matrix display
incorporates indicators at each channel
position, and pressing the speaker LINK
& CONNECT button changes the channel
assigned to the speaker. Press the LINK
& CONNECT button repeatedly until
the required channel for the speaker is
highlighted.
•
Repeat the channel assignment procedure
for each speaker or the WSR and when
each one is done return to your SOUND
HUB. Verify, from continuously illuminated
SOUND HUB top panel indicators that
all required channels are assigned. Now
press the SOUND HUB rear panel LINK &
CONNECT button to complete the speaker
connection process. All the speakers will play
a short confirmation tone, the SOUND HUB
top panel display will switch off, and the front
panel indicator will return to volume display.
Once all speakers are connected to your
SOUND HUB we recommend that you
carry out the Speaker Balance Adjustment
(
Distance Adjustment (
) routines. In addition to enabling
balance and distance adjustment, these
routines provide a check on speaker and
channel assignments.
NOTE:
Setup indication on the WSR is simplified as it
only offers one channel option.
13
