3. Installation and Setup
3.2 Getting Started and Switching On
Begin your DALI SOUND HUB installation process by
following the steps below.
•
Install batteries in the SOUND HUB remote control.
illustrates battery installation.
•
With the location of your SOUND HUB selected and any
modules fitted, plug the power supply cable into the rear
panel POWER socket illustrated in
and then plug the power supply into an appropriate mains
power socket.
•
Switch on your SOUND HUB by pressing the front panel
Standby button illustrated in
SOUND HUB remote control will automatically connect via
Bluetooth within 30 seconds.
2 x
D 6: Inserting batteries
NOTE:
If your SOUND HUB has been previously used it
may need to be reset to its defaults.
To reset your SOUND HUB, follow the
instructions in
.
11
