When charging, remove the USB cover on the bottom of the
instrument and insert the USB charging cable (voltage DC5V,
current not greater than 2A) to recharge.
When charging the indicator light is red, the indicator light is
green, when the charging is finish.
7. Video output
When in use, remove the cover of the video interface at the
bottom of the instrument and insert the configured video cable,
which can be connected to the display or other long-distance
transmission.
8. Matters needing attention
Because uncooled infrared telescopes use very sensitive thermal
sensors, the lens must not be directly pointed at a strong source
of radiation (such as the sun, laser beam or reflection, etc.) under
any circumstances (turn on or off), or it will cause permanent
damage to uncooled infrared telescopes!
After laser pointer function is opened, do not irradiate the human
eye, so as not to cause injury!
When the instrument has been the automatic sleep state, it can
be awakened by any key.
Check the power when the instrument is first used. If necessary,
charge it for three hours and then use it. When USB charges,
please place the instrument at 40 C.
Please do not depart the device housing or refit it without
authorization. Maintenance matters can only be operated by the
company's authorized personnel.
Zhejiang Dali Technology Inc
www.dali-tech.com
