7
English
The bass must be precise and distinct.
Connection to a low-pass fi ltered mono signal
When using the subwoofer with a surround amplifi er or other equipment
with a low-pass fi ltered subwoofer output, this output should be connected
to the subwoofer’s LFE input. With LFE connection, the signal goes directly
to the S1.5 amplifi er, bypassing the subwoofer’s crossover. No signal is
available at the LINE OUT outputs.
Any crossover adjustments should be made according to the instructions in
the owner’s manual of the surround processor. When using the LFE input,
level and phase controls are active and should be adjusted as described in
the section on adjustment.
Connection to a low-pass fi ltered mono signal
PRE-/SURROUND
AMPLIFIER
SUB OUTPUT
LINE IN
POWER AMPLIFIER
LOUDSPEAKER OUTPUT
Summary of Contents for S1.5
Page 1: ...www dali dk...