DALBO SUPERMAX 250, Manual

Page: 7 / 24

SUPERMAX
Page 7
Hydraulics
•
Lower machine fully for any repair work on the hydraulic system. Relieve hy-
draulic pressure, switch engine off and remove ignition key.
•
Clean hydraulic connections thoroughly before reconnecting. When connecting
hydraulic hoses to tractor hydraulics, ensure they are not under pressure.
•
Bleed the hydraulic system thoroughly after any repairs.
•
Check hydraulic hoses regularly for defects such as cracks, splits, crimps, wear
or breaks. Defective hoses must be replaced immediately.
•
Avoid spilling oil on the ground. If oil is spilt, collect and deliver to a destruction
point.
•
Clean hands thoroughly after contact with oil and grease. Change oil-stained
clothing immediately. Hydraulic oil can be harmful to the skin.
•
Hydraulic oil released under high pressure can penetrate the skin and cause
severe injury. In the event of injury, seek medical help immediately.
Assembly
•
Danger of crushing! Ensure no personnel are between implement and tractor,
or between the parts to be connected.
Maintenance and repair
•
Ensure machine is adequately supported or fully extended for all repair and
maintenance work. Ensure tractor and machine are properly braked, engine
stopped and ignition key removed.
•
Tighten all screw connections after a few hours use. Check all screw connec-
tions regularly and tighten as required. Check all split pins and bolts to avoid
mechanical failure.
•
Dispose of oil, grease and filters in accordance with local environmental pro-
tection rules.
Road transport
•
All safety and warning precautions mandatory by law must be fitted and tested
before transporting the machine on public roads. The driver is responsible for
fitting the correct lighting and number plate required in accordance with appli-
cable legislation.