MINIMAX XL
Page 12
Connecting and disconnecting
Connecting
Fig. 1
Connect roller to the tractor's fixed
towbar, where drawbar (A) must fit
between the towbar forks.
Insert pin, retract support leg and
place in working position (B)
•
The pin can be secured using a split pin or the like.
•
Secure support leg with a split pin.
•
If tractor towbar is too short, its lift arms can collide with the roller's sup-
port leg if cornering sharply to the left. Avoid by extending tractor towbar.
Hydraulics
The roller requires as standard a double-acting and single-acting hydraulic outlet,
where the double-acting is used for extending and single-acting for rais-
ing/lowering.
Table 1. Hose markings
Cylinder name
Colour Outlet
Function
Raise/lower cylin-
der
White
Single-acting
Raises the roller up onto its wheels and down
into working position.
Fold/
weight
equalisation
Red
Double-acting
Folds side sections up/out and acts as weight
equalisation from mid-section to side sec-
tions.
•
Check hydraulic hoses for crimping
Disconnection
The roller must be retracted (transport position) or extended before disconnection.
Lower support leg to lift roller drawbar from tractor towbar. Remove pin and dis-
connect hydraulic hoses.
Remember to depressurise hoses before disconnecting them.
A
B