DALBO MINIMAX 450, User Instructions

Page: 18 / 49

Page 18
Settings
The drum is factory set at delivery, but fine tuning will always be necessary
before use. Many different adjustment options make your drums more versa-
tile and enable optimal use of the machine.
In order to achieve uniform pressure on the ground, the draw-bar must be
adjusted correctly for the tractor concerned. Draw-bar height under the
drum’s red draw-bar towards the tractor should be shown in the table below
(approx. measurement).
Tensile adjustment
Fig. 6
In order to achieve uniform
pressure on the ground, the
bar must be adjusted cor-
rectly for the tractor con-
cerned.
Measured where the arrow
is indicated in the picture.
Height under drawbar:
See table below
Table 3. Drawbar height
Ring\Type 450 530 630 760 830
50 cm cambridge 50 cm 58 cm 58 cm 57 cm 57 cm
55 cm cambridge 53 cm 61 cm 61 cm 60 cm 60 cm
60 cm cambridge - 63 cm 63 cm 62 cm 62 cm
53 cm crosskill 49 cm 57 cm 57 cm 56 cm 56 cm
50 cm cross combi 48 cm 56 cm 56 cm 55 cm 55 cm
55 cm cross combi - 58 cm 58 cm 57 cm 57 cm
Fig. 7
It is important that the middle sec-
tion (A) of the machine is horizon-
tal during operation in order to
achieve uniform pressure against
the earth.
A