DALBO MINIMAX 450, User Instructions

Page: 16 / 49

Page 16
Connecting and disconnecting
Connecting
Fig. 5
The drum is connected to the
tractor’s fixed drawbar, where
the towing eye (A) must be be-
tween the drawbar’s forks.
The lever is inserted, the sup-
port leg raised and placed in
the working position (B).


Remember to secure the lever with lynch pins or similar.

Remember to secure the supporting legs with a lynch pin or similar.


The lift arms are adjusted so that they do not collide with the draw-
bar when turning.

Hydraulic hoses and a lamp cord are fitted so that they are not dam-
aged during operation.
Hydraulics
As a standard, the drum requires a double-acting and single-acting hydraulic outlet,
in which the double-acting output extends and the single-acting output raises/low-
ers (tilts) the drum. If a cracker board is fitted, a double-acting outlet is required.
Table 2. Hose labels
Cylinder name Colour Outlet Function
Tilt cylinders White Single-acting Lift the drum up on the wheels and down-
ward into working mode.
Folding Red Double-acting Folds the side-sections together/out.


Check that the hydraulic hoses have not been crushed.

The floating position is recommended for the socket for the tilt cylin-
der/fold-in when transporting by road and working in the field.
Disconnecting
The drum must be folded (in transport position) or unfolded before disconnection.
Screw out the support leg so that the drum’s bar can be lifted from the tractor’s
drawbar, disconnect the hydraulic hoses and remove the nail.
Remember to release the pressure from the connecting hoses to the hy-
draulic system before disconnecting the hoses.
A
B