DALBO MAXIDISC, Manual, Page: 19 / 38

MAXIDISC
Side 19
Operating and Driving Instructions
Proper operation is essential for optimum performance of your MAXIDISC. Proper operation
concerns both the carrying out of tillage operations in the field as well as the following of
safety precautions. Make sure that you have a thorough understanding of all safety pre-
cautions.
 •
Every day before operating the MAXIDISC, inspect all pins, nuts, bolts and
connections to be sure that all are tightened and securely in place.
•
The MAXIDISC must be in the fully raised position on both liftarms and
wheel frame when moving in reverseor turning around.
Unfolding and Folding

Always fold and unfold the wings of the MAXIDISC while the equipment is stationary
and the tractor is parked.
The mechanical transport locks become engaged and disengaged when the side wings are
folded and unfolded between the transport and the working position. Upon arrival to the
working area, activate the lever for the folding/unfolding of the side wings. Make sure that
the side sections are fully raised. Release the transport lock by activating the lever to the
wheel cylinder so that the cylinder is pressed out to the fully extended position. The
transport locks will be released, and the side wings together with the packer roller can
then be unfolded.
Folding
Move the wheel cylinders to the fully extended position before folding up the side sections
into the transport position. This ensures that the mechanical transport lock of the wheel
frame is able to fall down and lock the wheel frame into place.
After the side wings and the packer roller have been folded up, lower the MAXIDISC so that
the transport lock of the wheel suspension locks firmly and securely.
 Make sure that all transport locks are securely fastened before transporting the
implement on public roads.
Hydraulic Weight Transfer
The hydraulic weight transfer system of the MAXIDISC ensures an even distribution
of weight across all sections of the roller and an even field finish on all types of ter-
rain. The MAXIDISC is divided into two sections (3m or 2.5m) which can move inde-
pendently of each other.

It is very important to adjust the hydraulic weight transfer system correctly and
set the lever in the floating position.
Adjustment