DALBO FRONTFLEX, Manual, Page: 15 / 22

FRONTFLEX
Side 15
Fig. 9
Aggressive setting Passive setting
Adjust the depth manually by using the spindles (B, fig. 10). The sides of the spin-
dles are marked with numbers to facilitate uniform angle adjustment. Never set the
Crackerboard too deep when first starting the machine since this will put a greater
strain on the Crackerboard than necessary.
Fig. 10
If a ridge suddenly builds up in front of the Crackerboard while the implement is in
operation, raise the lift slightly, but only until the chains (fig. 5, B) are tight. The
FRONTFLEX will tilt as the rigidly mounted point in the front is raised. You will still be
able to achieve the same packing action after carrying out this adjustment, as no
significant weight will be removed from the FRONTFLEX.
B