FRONTFLEX
Side 13
Backlash in the rings
Due to normal tolerances of the castings, washers may have been added between
the bearings and the roller rings and also between the lock washer (A) at the end of
the shaft and the outermost ring (Fig. 7). To reduce and minimize backlash, insert a
washer of suitable size be
tween the ring and the lock washer (see page 18 ”
Replac-
ing bearings/shafts/rings
”).
Fig. 7
Cleaning and maintenance
When preparing for storage at the end of the season, clean the machinery thorough-
ly to prevent corrosion and facilitate future maintenance and repairs.
Check that the rings are intact and can turn freely without unnecessary play in the
bearings.
Check the linkage slide bar (nylon rail) for wear and make sure that the self-tapping
screws do not stick up above the surface.
A
Summary of Contents for FRONTFLEX
Page 1: ...FRONTFLEX GB 150 300 and 400 cm...
Page 2: ......