AXR-H
Page 43
Replacing Angle Adjustment Cylinders
The AXR-H must be unfolded and lowered with the side wings resting securely on
the ground.
It is important to relieve pressure in the angle adjustment cylinder.
1.
Remove the hydraulic fittings from the cylinder.
2.
Remove the pins. The cylinder can now be lifted out.
3.
Assemble the hydraulic angle adjustment in reverse order.
After assembling the hydraulic angle adjustment, bleed air out of the system by
moving the cylinder back and forth to the fully extended and retracted positions.
Always bleed air out of the system while the machine is unfolded.
Never allow bystanders within the operating radius of the implement when operat-
ing the angle adjustment.
Fig.37
Changing the seals on the angle adjustment cylinders
Fig. 38
Cylinder 63/30-205
