dalap ROV-300, User Manual

Page: 4 / 36

4
EN EN
Remove the frame from the controller body carefully. ( PIC . 3)
Using a screwdriver carefully remove the decorative strips.
The following is necessary for connection:
• disconnect the supply of electrical current into all the wires
• insulate the ends of the wires in a length of 5 to 7 mm, then connect them to the right connectors and using a
screwdriver tighten the safety screws of the connectors
• fix the controller securely into the junction box using the screws, and re-check the connection of all the supply
cables to the connectors
• replace the decorative strips and frame
The setting of minimum speed is done using a screwdriver in a special opening on the rear side of the cover (see
PIC . 2).
After connecting to electrical current, turn the control knob clockwise to start the device. The rotation speed of the fan is
decreased by turning the control knob in the clockwise direction, and it is accelerated by turning it counter-clockwise.
The controller is equipped with a replaceable fuse to protect against overvoltage.
The recommended minimum rotation speed of a fan is no less than half the maximum speed.
Assembly
The product must be transported and stored in the original packaging in a dry, well-ventilated environment at
temperatures from +5 °C to +40 °C and a maximum relative humidity of 80% (at a temperature of +25 °C).
Storage conditions
ROV
-300