dalap HW 6206, Instruction Manual

Page: 3 / 48

1) HEATING PERPARE
Set time
Before turn on the heater,set the time as right time.Press remote control
“ ” button,light on control panel,LED display shows 00:00 and
“Mo”light on.
HOUR Press “Set” button one time,LED display front “00” twinkle,
press“ two buttons set the Hours from 01--00(01=1 o’clock,02=2
o’clock...00=24 o’clock ect.)
MINUTE Press “Set” button again,LED display behind “00” twinkle, press
“ two buttons set the minutes from 00--59(01=1 Minute,02=2
Minute ect.)
WEEK Press “Set” button again,“Mo”light twinkle ,press “ two
buttons set the week from Mo--Su (Mo=Monday...Su=Sunday ect.)
PS :Press “Set” button,screen shows number will twinkle 5 seconds,you
should operate in time ,otherwise appliance will get back to standby.
(Appliance will keep the right time until power off)
2)General Using OPERATION
1. Turn the heater ON by pressing the ON/OFF main button ,the unit will
blow the cold air and “ ” light is on.
2. Pressing the “MODE” button ,the unit will blow the warm air and
both“ ”and“ ” lights are on.
3. Pressing the “MODE” button second times,the unit will blow the hot
air and both “ ”“ ” lights are on.
4. Pressing the “MODE” button Three times,the unit will blow the cold air
and “Fan/M” light is on.
PS :On control panel “ ” button, press 1
st
time is COOL AIR; 2
nd
times
is WARM AIR; 3
rd
times is HOT AIR; 4
th
timers is SWING FUNCTION;
5
th
times is OFF,pls noted it.
3) 24H Timer FUNCTION
1. Open the appliance as working conditions,(fan,warm,hot are all
ok).Control panel “ ” button and remote control “ ” button are same
operate way.
2. Press “ ” button ,set the timer up to 24 hours,keep press “ ” button
to increase the hours from 00--24(00=close,01=1hour,02=2
hours...24=24 hours ect.) and the “ ” light is on.
PS: set as “00” means no set timer ,the “ ” light is off.
4)THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan,warm,hot are all
ok).This function only through by Remote control.
2. To adjust temperature,press the “ ” to set the desired
temperature and the temperature set from 10
℃
to 49
℃
with the control
panel “ ” light on.
3. When the air temperature drops 2 degree below the set temperature,the
heater will start heating with ”I/W”(1000W).
4. When the air temperature drops 4 degree below the set temperature
,the heater will start heating with”II/H”(2000W).
5. When the air temperature high 1 degree or
≤
the set temperature,the
heater will blow the cold air .
5) Week Timer FUNCTION
1. Open the appliance as working conditions,(fan,warm,hot are all
ok).This function only through by Remote control.
2. Frist press “ ” button,then press “ ” two buttons select which
model you want.This function have 6 models, P1-P5 is smart model,
appliance have own schedule,pls check the details as below :
Week
Mo Tu We Th Fr Sa Fr
Model
P1 8:00-
17:00 8:00-
17:00 8:00-
17:00 8:00-
17:00 8:00-
17:00 8:00-
17:00 8:00-
17:00
P2 18:00-0
7:00 18:00-
07:00 18:00-
07:00 18:00-
07:00 18:00-
07:00 18:00-
07:00 18:00-
07:00
P3
8:00-
17:00 8:00-
17:00 8:00-
17:00 8:00-
17:00 8:00-
17:00 OFF OFF
P4
18:00-0
7:00 18:00-
07:00 18:00-
07:00 18:00-
07:00 18:00-
07:00 OFF OFF
P5 OFF OFF OFF OFF OFF 00:00-
24:00 00:00-
24:00