Introduction
1
1 Introduction
This manual outlines specifications, operation, and troubleshooting for Daktronics
portable WP-2103 water polo display. For additional information regarding the safety,
installation, operation, or service of these displays, refer to
Exchange and Repair & Return Programs (p� 17)
. This manual is not specific to a
particular installation. Project-specific information takes precedence over any other
general information found in this manual.
Important Safeguards
•
Read and understand all instructions before first use.
•
Toggle the power switch to "OFF" when not using the display�
•
Disconnect the batteries and turn the power switch "OFF" when servicing the display�
•
Keep the display far enough away from the pool to prevent water from directly
splashing on it�
•
After each usage, dry off the front of the display with compressed air or a fan�
•
Do not modify the structure or attach any panels or coverings to the display without
the express written consent of Daktronics�
•
Do not disassemble control equipment or electronic controls of the display; failure to
follow this safeguard will make the warranty null and void�
•
Do not drop the control equipment or allow it to get wet�
Specifications Label
Power specifications as well as serial and model number information can be found on an
ID label on the display, similar to the one shown in
DAKTRONICS 201 DAKTRONICS DR. BROOKINGS, SD PHONE 800-325-8766
SUITABLE FOR SERVICING ONLY WHEN DE-ENERGIZED
PUET FAIRE L'OBJET D'UN ENTRETIEN UNIQUEMENT S'IL EST HORS TENSION
LL-4284957
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION
Figure 1:
Specifications Label
Please have the assembly number, model number, and the date manufactured on hand
when calling Daktronics customer service to ensure the request is serviced as quickly as
possible. Knowing the facility name and/or job number will also be helpful.
Resources
illustrates a Daktronics drawing label.
This manual refers to drawings by listing the last
set of digits. In the example, the drawing would
be referred to as
DWG-1007804
. All references to
drawing numbers, appendices, figures, or other
manuals are presented in bold typeface.
Drawing Number
Figure 2:
Drawing Label
