Electrical Installation
5
Access Internal Components
The doors of Daktronics pitch time displays are secured by slotted fasteners.
1�
Release a fastener by gently turning it counter-clockwise with a flat-head screwdriver.
2�
Open the doors using the knob attached to the display face (if provided) or by
gently pushing the door outward from inside of the display (if there are no knobs).
3�
Components are attached inside the cabinet to the display’s backsheet and their
locations vary between display sizes. See
component locations.
Signal
Enclosure
Driver
Power Supply @2
Model # Label
Ground Lug
Radio Receiver
Bracket @2
Figure 4:
TI-2041 Internal Component Locations
Signal
Enclosure
Driver
Power Supply
Model # Label
Ground Bar
Radio Receiver
Bracket @2
Figure 5:
TI-2042 Internal Component Locations
