Daktronics TI-2022, Display Manual

Page: 13 / 32

Electrical Installation
9
Radio Settings
With a radio receiver installed in the display, watch for the radio Broadcast settings (“b1”)
and Channel settings (“C1”) during the Power-On Self Test (POST).
These values must match the settings in the control console:
If the radio receiver channel and broadcast settings match those set in the console but
the console does not control the display, there may be radio interference. This can occur
when a nearby display also uses radio control. In this case, change the settings of the
wireless radio receiver inside the display and in the console as described in the radio
control manuals.
RADIO SETTINGS
BCAST 1 CHAN 01