Introduction
1
Section 1:
Introduction
This manual explains the technology, operation, and maintenance of Daktronics backlit and non-
backlit scorer's tables. For additional information regarding safety, installation, operation, or service,
refer to the telephone numbers listed in
Section 3.7
. This manual is not specific to a particular
installation.
Important Safeguards:
Please read and understand all instructions before beginning the installation process.
Do not disassemble electronic controls of the display; failure to follow this safeguard will
make the warranty null and void.
Disconnect display power when not in use or when servicing.
Disconnect display power before servicing power supplies to avoid electrical shock. Power
supplies run on high voltage and may cause physical injury if touched while powered.
Do not modify the structure or attach any panels or coverings to the display without the
express written consent of Daktronics, Inc.
Project-specific information takes precedence over any other general information found in
this manual.
1.1 Resources
illustrates a Daktronics drawing
label. The drawing number is located in the
lower-right corner of a drawing. This
manual refers to drawings by listing the last
set of digits and the letter preceding them.
In the example, the drawing would be
referred to as
Drawing C-325405
.
Reference Drawing:
System Riser Diagram ...........................................................................
Drawing C-325405
Daktronics identifies manuals by the DD or ED number located on the cover page of each
manual. For example, this manual would be referred to as
DD1709675
.
Figure 1:
Daktronics Drawing Label
