Daktronics Sportsound SSR-300, Operation Manual

Page: 16 / 42

12 Setup & Operation
3.4 Powering Down
1.
Press the
USER DEFINED KEY
on mixer labeled
OFF
(
Figure 18
).
2. Turn the SOUND SYSTEM key switch to the OFF (horizontal) position.
3.
If the system will not be used for some time, unplug the power cord.
4. Place all accessories back in the appropriate slots of the storage drawers
to keep them safe and organized.
5.
Close and lock the rack door.
3.5 Mixer Operation
Basic instructions are described below. For more information about audio mixer
operation, refer to the Yamaha 01V96 Digital Mixing Console Owner’s Manual .
1.
Press the
USER DEFINED KEY
labeled
GAME
(
Figure 19
).
Note:
Custom keys (presets) may have been set up during training.
Press the desired key as needed for a specific application. The creation of
additional presets is recommended for advanced users only.
2. Ensure all source equipment is turned on and operational (refer to the
appropriate sections of this manual and/or manufacturers’ manuals).
3.
Verify gain knobs for the channels in use are adjusted so the
SIGNAL
light is green and the
PEAK
light is not lit (
Figure 20
).
4. Ensure the ON buttons for the channels in use and for the STEREO slider are illuminated; also verify
no SOLO buttons are illuminated ( Figure 21 ).
Figure 18: OFF Key
Figure 19: GAME Key
Figure 20:
Gain Knobs & PEAK/SIGNAL Indicators
Figure 21: Channel & SOLO Buttons