Setup & Operation
10
Powering On
Open the rear rack door to find the power cord in the lower-left corner (
the plug down through the hole in the bottom of the rack and out of the knockout/strain
relief. Connect the power cord into a standard 120V grounded outlet.
Figure 17:
Power Cord & Strain Relief
Turn the
SOUND SYSTEM
) to the
ON
(vertical) position.
Note:
Keep keys in a safe location to prevent theft/tampering of rack equipment!
Figure 18:
Power Key Switch
Before continuing, be sure to also power on the speaker cabinet(s)�
Mixer Operation
Basic startup instructions are described below. For more
information about audio mixer operation, refer to the
Yamaha Digital Mixing Console TF Series Reference
Manual
.
1�
Under
USER DEFINED KEYS
, press the button labeled
“
B
).
Note:
Custom keys (presets) may have been set up during training. Press the desired
key as needed for a specific application. The creation of additional presets is
recommended for advanced users only.
2�
Ensure all source equipment is turned on and operational (refer to the appropriate
sections of this manual and/or manufacturers’ manuals).
Figure 19:
User Defined Keys
