Setup & Operation 17
3.6 Hearing Assist System Operation (Optional)
Basic instructions are described below and shown in
. For more information, refer to the
Listen
®
LT-
800 Stationary Transmitter
,
Listen
®
LR-400 FM Receiver
, and
Listen
®
LA-122 Universal Antenna Kit Users
Manuals
.
1.
Press
POWER
to turn on the transmitter if it is not already on.
2.
Use the
CHANNEL SELECT
buttons to select a channel.
3.
Plug the earphones into the jack on top of the handheld receiver.
4.
Rotate the volume dial counterclockwise to power on the handheld receiver.
5.
Flip open the battery cover to expose the control buttons. Use the
CHANNEL SELECT
buttons to
select the same channel that was set on the transmitter, or press
SEEK
to locate the active channel.
Note:
Insert new or fully-charged batteries prior to each use, and always have spares on hand.
6.
Repeat steps 3-5 for any additional receivers.
3
4
1
2
figure 26:
Optional Hearing Assist System
