Electrical Installation
10
Speaker Line OUT to Cluster
Connect 1 pair, 12 AWG speaker cable (part # W-1561)
from each amplifier output in the audio junction box to
a corresponding speaker input using fork connectors
(part # E-1078). There will be a total of seven (7) wire pair
connections as shown below and in
DWG-3822601
:
Output & Wire Colors Connections
CH A
(+) Red / (–) Black
• Top Home side
column speaker
• Bottom Home side
column speaker
CH B
(+) Blue / (–) Brown
• Top Visitor side
column speaker
• Bottom Visitor side
column speaker
CH C
(+) White / (–) Green
• Court Fill speaker 1
• Court Fill speaker 2
CH D
(+) Yellow / (–) Orange • Subwoofer
Amplifier Presets
The amplifier for the SSN-250 system comes loaded with 3
separate presets for varying levels of bass (
). To
change the default bass setting, follow the steps below.
1�
If the menu screen is locked, use the scroll wheel and
[ENTER]
button to enter the password (default = DAK).
2�
Press
[ENTER]
to access the main menu.
3�
Select PRESETS and then press
[ENTER]
.
4�
Select PRESET RECALL and then press
[ENTER]
.
5�
By default, the amplifier is set to preset U4. Use the
control knob to select U5 (low sub) or U6 (lowest sub).
6�
Press
[ENTER]
twice to confirm and load the chosen
preset.
CAUTION! Do not select any preset other than U4, U5, or
U6 or speaker damage may occur�
Figure 9:
Column/Court Speakers
Figure 10:
Subwoofer
Figure 11:
SSN-250 Presets