Uploading Bitmap Images to the All Sport CG
26
7�
Type in “#CB3” and press
[Enter]
on the keyboard to set the CG to 57600 baud rate.
The CG will respond with “57600” and “AllSportCG>” underneath.
8�
Go back to
Setup > Serial Port Setup
and select
57600
for the
Baud rate
.
9�
Press
[Enter]
on the keyboard, and the response “AllSportCG>” will appear. Now both
devices are communicating on 57600 baud rate.
10�
Type in “BD” and press
[Enter]
on the keyboard. The message “Transfer file now” will
appear.
11�
Go to
File > Transfer > XModem > Send
.
12�
Navigate to the bitmap image file created with the parameters shown in
and click
Open
.
13�
Once the progress bar is complete, press
[Enter]
on the keyboard. “AllSportCG>”
appears again to indicate the file transfer is complete.
14�
Disconnect the serial cable from the All Sport CG and *CYCLE POWER* to return the
device to normal operation and begin displaying the new graphic.