Daktronics OMNISPORT 2000, Operation Manual

Page: 95 / 182

Judge Consoles
85
JUDGE 1
TM: 5.0 AI:
The LCD will then show the two scores and an OK after they have been entered.
Two Judge Panel Operation
With two panels of judges, the first panel enters the first set of scores, and the second
panel enters the second set of scores for the routine. The prompts are shown below.
Technical Routine Operation
In a technical routine, the first panel of judges enters the
score for the execution of the routine.
JUDGE 1 OK
EXECUTION: 5.0
The OK will display by the judge’s number after the score is entered.
The second panel of judges enters the score for the overall
impression of the routine.
JUDGE 6 OK
OVERALL: 5.5
The OK will display by the judge number after the score is entered.
Free Routine Operation
In a free routine, the first panel of judges enters the score for
the technical merit portion of the routine.
JUDGE 1 OK
TECHNICAL: 5.0
The OK will display by the judge number after the score is entered.
The second panel of judges enters the score for the artistic
impression portion of the routine.
JUDGE 6 OK
OVERALL: 5.5
Score Editing
After a score has been entered, it may be changed by pressing [RE-ENTER/EDIT] on the
JC-100 (or [EDIT] on the RC-100/RC-200). This puts the console back into the scoring mode
to allow the score to be re-entered. The score cannot be edited if the OmniSport 2000
console operator has already accepted the judge’s scores.
JUDGE 1
EXECUTION: 5.0
JUDGE 6
OVERALL: 5.5
JUDGE 1
TECHNICAL: 5.0
JUDGE 6
ARTISTIC: 5.5