Daktronics OMNISPORT 2000, Operation Manual

Page: 40 / 182

Swimming Mode Operation
30
Typical Single-line Scoreboards
The normal single-line display of timing information is completely automatic and does not
require any operator input. The following information is for normal (automatic) operation.
Figure 38 shows the sequence of information on single-line scoreboard during a race.
Start of Race
The running time counts up from 0.0.
Split Times
The scoreboard will display the first place split time with the lane. The split time will hold
for however many seconds as set up in the scoreboard menu of the OmniSport 2000
console (default = 15 seconds).
The display will continue showing the running time.
Finish Times
At the end of the race, the scoreboard will scroll through the results in the order that the
competitors finish. Each finish time will hold at least the amount of time as set up in the
scoreboard menu of the OmniSport 2000 console (default = 5 seconds).
Timer Reset
The scoreboard scrolls through the results of the last race until the start of the next race.
LANE TIME PLACE DAKTRONICS
LANE TIME PLACE DAKTRONICS
LANE TIME PLACE DAKTRONICS
LANE TIME PLACE DAKTRONICS
LANE TIME PLACE DAKTRONICS
Start of Race
Running Time
Running Time
Finish Time
Split Time
Figure 38: Single-Line Race Sequence