Daktronics GALAXY ECCB Series, Installation And Operation Manual

Page: 36 / 41

Replacing Parts
32
6� Replace the grommet. Ensure that it is firmly in place to prevent water intrusion. Refer
to Figure 31 .
7� Seat the router firmly into the mounting bracket.
8� Reconnect the antenna cable to the Wi-Fi router.
Refer to Figure 32 .
9� Slide the router bracket down onto the mounting
screws on the backsheet of the display. Tighten the
screws with the nut driver. Refer to Figure 33 .
10� Secure the module in front of the Wi-Fi router by
turning the
1
/
8
" hex head wrench a quarter-turn
clockwise. Make sure not to pinch any cables.
Figure 31: Install Rubber Seal
Figure 32: Install New Antenna
Cable
Figure 33: Install New Router
Bracket