Control Options Setup
20
FLXR3 Server Radio Kit
FLXR3 server radio components are shown in
. The letter for each component is
noted in steps that follow.
Letter Component Type
Letter Component Type
A
Pole-Mount Hardware
F
Antenna Adapter
B
Wall Pack Transformer
G
High Gain Antenna
C
Antenna Extension Cable - 50'
H
Server to DM-100 Interconnect Cable - 10'
D
DIN Rail Mount/Track
I
DM-100 (Existing)
E
900 MHz Server Radio
Indoor Server Radio Installation
1�
Mount the server radio (E) and wall pack transformer
(B).
2�
Feed the interconnect cable (H) between server
radio (E) and DM-100 (I). Connect the wall pack
transformer (B) to the server radio (E).
Mount the Exterior Server Radio Antenna
1�
Mount the high gain antenna (G) using mounting
hardware (A) on the outside of the building that
contains the server radio. Mount the antenna as high
as possible in free air. Locate the antenna within
50' (15.2 m) of the server radio location. Refer to
.
2�
There are two antenna mounting options:
• U bolts for pole mounting
• Brackets for wall mounting
B
A
C
D
E
F
G
H
I
Figure 39:
Server Kit Components
H
Figure 40:
DM-100 Interconnect
Cable
From
DM-100
To Wall
Pack
Figure 41:
Server Radio
Connections
Figure 42:
Mounted Antenna
