Daktronics FB-2006, Display Manual

Page: 7 / 76

Introduction 1
Section 1: Introduction
This manual explains the installation and maintenance of the Stackable Outdoor Scoreboards.
If you have other questions regarding the safety, installation, operation, or service of these
systems, contact Daktronics. Customer Service Help Desk telephone numbers are listed on the
cover page of this manual.
1.1 How to Use This Manual

Important Safeguards:

Read and understand these instructions before installing the scoreboard.

Do not drop the control console or allow it to get wet.

Be sure the scoreboard is properly grounded with a ground electrode at the
scoreboard location.

Disconnect power to the scoreboard when it is not in use .

Disconnect power when servicing the scoreboard.

Do not modify the scoreboard structure or attach any panels or coverings to
the scoreboard without the written consent of Daktronics, Inc.
Figure 1 illustrates the Daktronics drawing numbering system. Daktronics identifies
individual engineering drawings by their drawing number (7087-P08A-69945 in the
example), which is located in the lower right corner of the drawing. This manual
refers to drawings by their last set of numbers and the letter preceding them. The
example would be
Drawing A-69945 .
Reference drawings in this manual are grouped and inserted in alphanumeric
order in
Appendix A: Reference Drawings .
Listed below are a number of drawing types commonly used by Daktronics, along
with the information that each is likely to provide.

System Riser Diagrams: overall system layout from control room to
display, power, and phase requirements.

Shop Drawings: fan locations, transformer locations, mounting
information, power and signal entrance points, and access method (front or
rear).

Schematics: power wiring, signal wiring, panelboard or power termination
panel assignments, signal termination panel assignments, and transformer
assignments.
Figure 1: Daktronics Drawing Label