Daktronics DBH-150, Operation & Maintenance Manual

Page: 9 / 19

BANNER HOIST REMOTE
The Banner Hoist System operates using a wireless remote
control that communicates with the hoist using radio wave
RF transmission. When operating the Banner Hoist system,
always have a clear line of sight to the hoist to minimize RF
interference and to promote safe operational use.
Powering On/Off
To power up the Banner Hoist, simply press the green
START
button
(Figure 1)
. To power it down, press the
red STOP button.
Raising/Lowering
To raise the Banner Hoist, simply press the UP button
and press the
DOwN
button.
Battery Maintenance
To replace the two AA alkaline batteries remove the
screw on the plastic back plate using a flat-head screw
driver (Figure 2).
Replace the batteries and screw the back plate into
proper position.
Figure 2:
Banner Hoist Remote back
03
GENERAL OPERATION/CONfIGURATION
5
Figure 1: Banner Hoist Remote front
GENERAL OPERATION/CONfIGURATION