manualshive.com logo in svg

Daktronics COLORSMART BB-3102, Display Manual

The Daktronics COLORSMART BB-3102 Display Manual is a comprehensive guide that allows users to maximize the full potential of their Daktronics display board. This user-friendly manual is available for free download at manualshive.com, providing step-by-step instructions and valuable insights on settings, troubleshooting, and maintenance for an exceptional user experience.

Share
Download
background image

 

14 

Mechanical Installation 

If the scoreboard is to be suspended from a hoist: 
 

1.

 

Attach the cable sling to the four lift tubes on the corner braces of the frame. 

2.

 

Lower the hoist cables and attach them to the master links.  

3.

 

Raise the scoreboard 1-2' (305-610 mm) from the floor, and level the scoreboard by 
adjusting the turnbuckles built into the slings. 

4.

 

The hoist installer must set upper and lower primary limits and all safety limits. 
Daktronics recommends maintaining a minimum of 2' (610 mm) between the 
scoreboard and the nearest obstruction. 

 
WARNING! Never raise or lower the scoreboard with personnel or equipment underneath!

Summary of Contents for COLORSMART BB-3102













































































































Reviews:

No comments

Related manuals for COLORSMART BB-3102

Daktronics Galaxy Series Display Manual preview
Galaxy Series
Brand: Daktronics Pages: 70
Samsung SyncMaster P42HP Guía De Inicio Rápido preview
SyncMaster P42HP
Brand: Samsung Pages: 34
Samsung SyncMaster P2270HD User Manual preview
SyncMaster P2270HD
Brand: Samsung Pages: 72
Samsung OM55N-DS User Manual preview
OM55N-DS
Brand: Samsung Pages: 111
Farenheit 5.8" TFT LCD Wide color monitor User Manual preview
5.8" TFT LCD Wide color monitor
Brand: Farenheit Pages: 4
Racegeek d10 Instructions For Use Manual preview
d10
Brand: Racegeek Pages: 23
Zenith ZVM-121 Service Manual preview
ZVM-121
Brand: Zenith Pages: 34
Mitsubishi DPLUS 74SB -BKB Service Manual preview
DPLUS 74SB -BKB
Brand: Mitsubishi Pages: 176
Intergraph ErgoAct OEM Monitor Installation Manual preview
ErgoAct OEM Monitor
Brand: Intergraph Pages: 18
Hyundai ImageQuest V570 User Manual preview
ImageQuest V570
Brand: Hyundai Pages: 18
NEC 42 VP5 VM5 Operation Manual preview
42 VP5 VM5
Brand: NEC Pages: 36
Raven ISOBUS AUXILIARY DISPLAY Manual preview
ISOBUS AUXILIARY DISPLAY
Brand: Raven Pages: 19
Waeco PerfectView M5L Installation And Operating Manual preview
PerfectView M5L
Brand: Waeco Pages: 156
NewLine IB SERIES User Manual preview
IB SERIES
Brand: NewLine Pages: 72
Adelpia TGL2240A Service Manual preview
TGL2240A
Brand: Adelpia Pages: 52
AOC E1670SWU-E User Manual preview
E1670SWU-E
Brand: AOC Pages: 47
BenQ RL2450H User Manual preview
RL2450H
Brand: BenQ Pages: 49
Power Acoustik PT-151CM User Manual preview
PT-151CM
Brand: Power Acoustik Pages: 8

Brands by name

Popular brands

Load more brands